Saman Stain for Fine wood and Floors - Castle Stone 011 - 946 ml (32oz)

For professional results

One Coat Coverage, No Overlapping Lines, and Safe & East to use. Low odor & Water Clean Up.

Easy wipe-on application

SamaN's odorless fine wood and floor stains are easy to use and environmentally friendly. No per-stain or conditioner required. With SamaN's unique formula you will need just one coat and it doesn't cause wood grain raising nor does it leave any signs of overlapping marks. 

1. Sand and prepare floor
2. Sand the surface until the desired finish has been achieved. It is recommended sanding the floor with 80 to 100 grit sand paper. Varnished floors need to be sanded down to bare wood. 
3. Wet the floor with water and let it dry completely. Do not use sealer if the floor is to be stained. 
4. Shake thoroughl;y before applying
5.  Pour a small amount of stain on a sponge and rub in the direction of the wood grain. Wipe any excess with a soft clean cloth.
6. Allow 6 to 8 hours before recoating with a SamaN top coat. 

Cleaning: Clean -up tools with water and light soap. 

Coverage: 32oz can covers up to 200 sq.ft